1
5
6
3
2
7
8
9
4
10
11
700W DMX Fog machine with Timer
Page 4
English
1 - DIP switch
Allows you to determine the
initial address in DMX mode.
Please refer to paragraph 4 for
more information about this.
2 - Remote control input
Your FazeTEC can be
controlled via an optional wired
remote control.
Ref : CTL-FazeTec
Code : 10246
This remote control allows you
to activate or deactivate the
smoke projections and adjust
the smoke output.
3 -Smoke output settings
Allows you to adjust the smoke
output.
4 -LED Indicator
This indicator lights up or
flashes in different colours
depending on the status of
your FazeTEC:
Flashes green: Pre-heating
Flashes green slowly :
Cleaning process
Lit in green: Ready to operate
Flashes oranges: Producing smoke
Lit in orange: Receiving a DMX signal
Lit in red: Overheating, there is a problem with temperature control.
Flashes red: The smoke fluid level is too low
Flashes red/green : Cannot pre-heat, there is a problem with the heater.
2 - Package contents
3 - Description
3-1 : The fog machine
The package must contain the following articles:
- The FazeTEC fog machine and its canister
- The user guide (you are currently reading)
- A power cord
In the event of one or several missing articles, please contact your retailer immediately.
