Contemporary
Research
7
ICC2-ATSC HDTV Tuner/Controller
Front Panel Setup
To Enter a Front Panel Programming Mode:
1.
Press and hold the Power button, then press the Volume Up button
2.
Release all buttons, the ICC2-ATSC will now be in the front-panel programming mode. The Air LED
will flash, indicating programming mode.
3.
The first two digits show the mode, the second show the option.
4.
Changes are saved in non-volatile memory as they are entered.
5.
The Volume up/down buttons scroll through programming modes, forward and reverse.
6.
The Channel up/down buttons scroll through possible options for each mode.
To Exit the Front Panel Mode
Push and release the Power button.
Mode
0-9
Parameters
RF Tune
0.0
0=CATV (Default)
1=Off-Air
2=IRC
3=HRC
4=Cable Auto
Baud Rate
1.1
1.2
1.3
1.4
1.5
1.6
1.7
300
600
1200
2400
4800
9600
19200
Unit Number
2.1
1-99
Zone Number
3.0
1-15 System device number is (Unit + (Zone * 256))
Panel Lockout
4.0
Reserved (performed by LM command)
Power-up Volume
5.0
5.X
Restore previous level (default)
1 – 63 sets volume level
Firmware Version
6.20
Ex: Version 2.0 -
Press and hold Channel Up, then Power to restore tuner to default settings
Press and hold Channel Up and Down, then Power to scan channels
Captions
10.0
10.1
Captioning off (default)
Captioning on
Caption Mode
11.1
11.2
11.3
11.4
11.X
1=Caption 1 (default)
2=Caption 2
3=Caption 3
4=Caption 4
5-8= Text 1-4 (rarely used)
Video Detect
12.3
No AV mute (fixed)
AV Status
13.0
No AV status (default)
Label Mode
14.2
Numeric (fixed)
IR Remote
18.1
0=IC-RC
1=HD2-RC
Tune Control
19.0
0=Tune all channels
1= Only tune channels in List
Digital Audio
47.0
47.1
47.2
0=AC-3– Dolby 5.1
1=PCM (set to this for audio through HDMI)
2=PCM Variable (default)
HD Output
48.0
48.2
RGB (Default)
Component
HD Format
49.0
49.1
49.2
49.3
0=1080i (Default)
1=720p
2=480p
3=480i
