Contemporary Research 5
ICC2-ATSC 4S
RF Wiring Options
There are two ways to wire RF feeds to the ICC2-ATSC 4S.
Single RF Feed
Most applications will use a single RF feed, either Cable or Air (Antenna).
•
Connect the RF feed to
RF In
on the top of the tuner. This allows the tuner to receive the iCC-Net control signal.
•
Connect the included short RF cable from
RF Out
to the
Air/Cable
RF input.
Dual RF Feed
Other applications will use both Cable and Air (Antenna) feeds. The tuner can switch between both, maintaining separate
channels lists for each. You’ll need the optional
RF-AB switch,
which has a mini 3.5mm cable that connects to the A/C
control output on the back of the tuner. The placement of RF connections on the RF-AB is different than shown
–
the RF
ports above are arranged for clarity.
•
Wire the
Cable
feed to the
RF In
input at the top of the back panel. Note that the Cable feed needs to go to
RF In
so the tuner can receive the iCC-Net control channel.
•
Connect the
RF Out
to the
Cable
input of the
RF-AB
.
•
Connect the
Antenna
feed to the
Air
input of the RF-AB.
•
Connect the included short RF cable to the RF-AB switch
RF Out
, then to the
Air/Cable
RF input on the tuner.
•
Connect the 3.5mm mini plug to the
A/C
control output.
