Contemporary Research ICC2-ATSC 4, Product Manual

Page: 12 / 26

Contemporary Research 12 ICC2-ATSC 4S
iCC-Net Commands
Command Description
Control
Power Off P0 “$A5,<dh>,<dl>,2,’P0’ ” (6 bytes)
Power On P1 “$A5,<dh>,<dl>,2,’P1’ ” (6 bytes)
Power Toggle PT “$A5,<dh>,<dl>,2,’PT’ ” (6 bytes)
Volume
VL “$A5,<dh>,<dl>,3,’VL’,<vol level>” (7 bytes)
Sets TV volume level
0 = Mute
1 – 63 = Minimum level (1) to maximum volume (63)
RS-232 Control T0 “$A5,<dh>,<dl>,3, ‘T0’,<Control Type>” (7 bytes)
Change control type – see page 7
IR Remote Q8= “$A5,<dh>,<dl>,3, ‘Q8’,<IR Remote>” (7 bytes)
0=IC-RC
1=HD2-RC
Control Lock LM “$A5,<dh>,<dl>,3,'LM',<control>” (7 bytes)
Locks out front panel and IR remote control functions.
Bit 7 Selects IR remote control operation (0=enabled, 1=disabled)
Bit 6 Selects volume control operation (0=enabled, 1=disabled)
Bit 5 - 1 Always 0
Bit 0
Selects front panel buttons operation (0=enabled, 1=disabled)
Operating
Parameters TM “$A5,<dh>,<dl>,3,’TM’,<setting>” (7 bytes)
Sets up key functions in the unit
Bit 0 – Alpha channel labels
0=alpha labels off
1=alpha labels on
Bit 1
– Numeric channel labels,
0=num labels off
1=num labels on
Bit 2
– Channel up/down operation,
0=Tune Ring,
1=Send IR Keypad response
Bit 3-7 = 0
Control String UX "$A5,<dh>,<dl>,2+string length>,'UX'<string>" (variable bytes)
Sends an RS-232 string (ASCII, decimal, or hex) directly to the TV display.
Ex : "$A5,1,2,6,'UX, 'PON', 13" Sends PON, followed by carriage return (device 258)
Baud Rate
R5=
Set Baud Rate
1=300
2=600
3=1200
4-2400
5=4800
6=9600
7=19200
Inputs LQ= “$A5,<dh>,<dl>,3,’LQ’,<IR Code>” (7 bytes)
200=TV/Tuner 209=RGB 2
201=Video1 210=RGB3
202=Video2 211=HDMI1
203=Video3 212=HDMI2
204=S-Video1 213=HDMI3
205=S-Video2 214=HDMI4
206=Component1 215=HDMI5
207=Component2 220=DisplayPort DTV
208=RGB 1 221=DisplayPort PC