Page | 6
ICC1-TC Tuner/Controller Product Manual 082020
Rear Panel Connections
RF In
For connection from RF headend, input used for the controller to extract the iCC-Net control data.
RF Out
Loop out for connection to Air/Cable input.
Air/Cable
Input to tuner.
USB
USB-A service port. May be used for tuner/decoder firmware updates.
HDMI
HDMI receptacle, Type A, Version 1.4b. Output resolutions available are 2160p, 1080p, 1080i, 720p, 480p, and 480i. The output may be
configured for Auto, HDMI, or DVI. The output normally automatically detects a DVI display. The audio format follows the digital audio
output settings.
Audio
3.5mm TRS output for stereo analog audio. The analog audio level always follows the volume control settings.
RS-232
DB-9 port for RS-232 data link to for video display control. Port settings are automatically configured for the display device type selected
unless otherwise noted May also be used for application and bootloader firmware updates.
IR In
3.5 mm TRS jack for optional external IR receiver or wired IR from a control system processor.
Tip= +5v DC (50mA max)
Ring= Input
Sleeve= Ground
12VDC
Power input 2.1mm coaxial jack (inside center conductor positive).