Contec XPT-T1000 Series, Manual

Page: 55 / 60

—
Recovery Method
—
XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC)
— 55 —
3. BIOS settings
After restarting the system by the method outlined above, immediately press [DEL] or [ESC] to start
the BIOS settings screen (Aptio Setup Utility).
1. Press the [ → ] key to select the “Advanced”
menu. Press the [ ↓ ] key to select the “RAS
Configuration” submenu.
Select [Enabled] from “Win10 2019 Boot WDT”.
Press the [Esc] key to return to the Advanced
menu.
2. Press [ → ] key, select [Boot] menu.
Please check if the “Boot Option #1”
in Boot Option Priorities is assigned to
[Windows Boot Manager (P0:
XXXXXXXXXXXXXX)].
If not, assign it appropriately.
(Notice)
For non-software RAID configuration
x in the [Windows Boot Manager(XXXXXXX)] indicates the name of HDD/SSD connected.
For software RAID configuration
x in the [Windows Boot Manager(XXXXXXX)] indicates RAID configuration information of HDD/SSD
connected.
3. Press [F4] key, select [Save & Exit Setup].
Please [ENTER] key
If you save configuration.
The system will automatically reboot.
Main Advanced Chipset Security Boot Save & Exit
Boot Configration Sets the system boot order
Setup Prompt Timeout 1
Bootup NumLock State [On]
Quiet Boot [Disabled]
Boot Option Priorities
Boot Option #1 [Windows Boot Manager
→←: Select Screen
(P0: XXXXXXXXXXXXXXX)]
↑↓: Select Item
Boot Option #2 [UEFI: Built -in EFI] Enter: Select
Fast Boot [Disabled] +/-:Change Opt.
New Boot Option Policy [Default] F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
Aptio Setup Utility - Copyright © 2018 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Boot Configration Sets the system boot order
Setup Prompt Timeout 1
Bootup NumLock State [On]
Quiet Boot [Disabled]
→←: Select Screen
↑↓: Select Item
Save configration and exit? Enter: Select
+/-:Change Opt.
F1: General Help
Yes No F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright © 2018 American Megatrends, Inc.
Save & Exit Setup
Advanced
RAS Configuration
Firmware Version XX.XX
System Uptime XXD XXH XXM XXS
System AC Power-on Time XXD XXH XXM XXS
WDT during POST [Disabled]
WDT during Boot of the Time [Disabled]
PI2 Function
Win10 2019 Boot WDT Disabled
Enabled
Aptio Setup Utility - Copyright © 2018 American Megatr
Win10 Boot WDT