Contec VPC-3000, User Manual, Page: 24 / 125

3
．
Hardware setup
User’s Manual
17
3
．
Hardware setup
Before Using the VPC-3000 for the First Time
Follow the next steps to set up the VPC-3000.
STEP1 Install Hard disk, Memory (DIMM) packaging, CD-ROM, DVD Multi drive packaging,
and set Jumper switches.
By referring to the information in this chapter, set the VPC-3000.
STEP2 Connect cables.
Connect the cable of necessary external devices, such as Printer and display, to this
product using appropriate cables.
STEP3 Tuen on the Power
After venifying that you have correctly steps 1 and 2, turn on the power. If you find any
abnormality after turning on the power, turn it off and check to see if the setup has been
performed properly.
STEP4 BIOS Setup
By referring to Chapter 4, setup BIOS. This setup requires a keyboard and a display.
※
Before using the VPC-3000, be sure to execute “Restore Defaults” to initialize the
BIOS settings to their default values.
(See Chapter 4, “Save & Exit tab”.)
If your VPC-3000 is a Windows preinstalled model, be sure to connect the keyboard and mouse to it
before turning the poer on for the first time.