4. Front Panel connects configuration
SCP-8550-LLV
25
LAN1 connector
This connector is 100BASE-TX/10BASE-T LAN connector.
There are LED which shows 10/100Mbps transmission speed, link and state of operation. The follow
table shows the pin assignments of these connectors.
*
The category-5 cable is required for transmission at 100Mbps.
Table 4.4. LAN1 connector
Function
Tx+
Tx-
Rx+
N.C.
N.C.
Rx-
N.C.
N.C.
Pin No.
1
2
3
4
5
6
7
8
8
1
Link
LED
Transmit
LED
Right LED: Link LED (Link: Green, Active: Blink)
Left LED: Transmit LED (10M: Off, 100M: Yellow)
LAN2 connector
This connector is 1000 BASE-T/100BASE-TX/10BASE-T LAN connector.
There are LED which shows 10/100/1000Mbps transmission speed, link and state of operation.
The follow table shows the pin assignments of this connector.
*
The category-5 cable is required for transmission at 100/1000Mbps.
Table 4.5. LAN2 connector
Function
Tx+
Tx-
Rx+
N.C.
N.C.
Rx-
N.C.
N.C.
Pin No.
1
2
3
4
5
6
7
8
8
1
Link
LED
Transmit
LED
Right LED: Link LED (Link: Green, Active: Blink)
Left LED: Transmit LED (10M: Off, 100M: Green, 1000M: Orange)
Summary of Contents for SCP-8550-LLV
Page 7: ...vi SCP 8550 LLV...
Page 37: ...5 Jumper setting 30 SCP 8550 LLV...
Page 47: ...6 RAS Functions 40 SCP 8550 LLV...
