Contec PT-D2515, Manual

Page: 41 / 48

3-15
BIOS Setup Touch Panel PC
Power
▶ ACPI Sleep State
This item specifies the power saving modes for ACPI function. If your operating
system supports ACPI, you can choose to enter the Standby mode in S1 (POS)
or S3 (STR) fashion through the setting of this field.
▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before
power failure or interrupt occurred.
** Advanced Resume Events Control **
▶ Resume On USB from S3/S4
The item allows the activity of the USB device to wake up the system from S3/S4
sleep state.
▶ Resume On PCIE/PCI PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE/PCI PME is detected.