Contec PT-970 A Series Reference Manual Download Page 50

Page: 50 / 77

—

BIOS Set up

—

PT-970 A/B Series Reference Manual

- 50 -

USB Configuration

Configure the USB settings.

Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.

Chipset

USB Configuration
USB Module Version

  USB Devices:
  1 Keyboard, 1 Mouse, 1 Hub

  Legacy USB Support

[Enabled]

EHCI Hand-off

[Disabled]

USB Mass Storege Driver Support

[Enabled]

USB hardware delays and time-outs:
Device power-up delay

[Auto]

USB Overcurrent

[Disabled]

USB Powerdown on S5

[Disabled]

USB 2.0 (EHCI) Support

[Enabled]

→←

:Select Screen

↑↓

:Select Item

Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Load Defaults for Win10
F4:Save & Exit
F5:Load Defaults for Win7
ESC:Exit

Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.

USB Configuration

Item

Options

Description

Legacy USB Support

Enabled / Disabled / Auto

Configure whether USB keyboards and

similar devices will be usable with legacy

operating systems (such as MS-DOS).

EHCI Hand-off

Disabled / Enabled

Do not change this setting.

USB Mass Storage Driver Support Disabled / Enabled

Configure the USB storage support

settings with BIOS.

Device power-up delay

Auto / Manual

Do not change this setting.

USB Overcurrent

Enabled / Disabled

Do not change this setting.

USB Powerdown on S5

Enabled / Disabled

When set to Enabled, the USB power can

be turned off when entering into the S5

state due to such as OS shutdown.

Summary of Contents for PT-970 A Series














































































Search results

Summary of Contents for PT-970 A Series

Reviews:

Brands by name

Popular brands

Contec PT-970 A Series, Reference Manual

Search results

Summary of Contents for PT-970 A Series

Reviews:

Brands by name

Popular brands