manualshive.com logo in svg

Contec PI-128L, User Manual, Page: 44 / 62

Share
Download
Contec PI-128L User Manual Download Page 44

4.  Functions

CONTEC CO., LTD. 

                                                                                                                                            

PIO-64/64L(PCI), PI-128L(PCI), PO-128L(PCI)

37

4. 

 

Functions

This section describes the functions of the board.

Data I/O Function

Data Input

When input data is “ON”, “1” is input to the relevant bit.

When the input data is “OFF”, in contrast, “0” is input to the relevant bit

Data Output

When “1” is output to the relevant bit, the corresponding transistor is set to “ON”.

When “0” is output to the relevant bit, in contrast, the corresponding transistor is set to “OFF”.

C A U TIO N

                                                                                                                                                           

When the PC is turned on, all output are reset to 0 (OFF).

Monitoring Output Data

The <PIO-64/64L(PCI)> and <PO-128L(PCI)> can read the state of the data currently being output
without affecting the output data.

Summary of Contents for PI-128L































































Reviews:

No comments