manualshive.com logo in svg

Contec PI-128L, User Manual, Page: 21 / 62

Share
Download
Contec PI-128L User Manual Download Page 21

2.  Setup

                                                                                                                                            

 CONTEC CO., LTD.

14

PIO-64/64L(PCI), PI-128L(PCI), PO-128L(PCI)

Plugging the Board

(1) Before plugging the board, shut down the system, unplug the power code of your PC.

(2) Remove the cover from the PC so that the board can be mounted.

(3) Plug the board into an expansion slot.

(4) Put the cover back into place.

CAUTION

                                                                                                                                                            

-

Do not touch the board's metal plated terminals (edge connector) with your hands.

Otherwise, the board may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.

-

Do not install or remove the board to or from the slot while the computer's power is turned on.

Otherwise, the board may malfunction, overheat, or cause a failure.

Doing so could cause trouble. Be sure that the personal computer or the I/O expansion unit power is
turned off.

-

Make sure that your PC or expansion unit can supply ample power to all the boards installed.
Insufficiently energized boards could malfunction, overheat, or cause a failure.

Summary of Contents for PI-128L































































Reviews:

No comments