4. Functions
38
GPIB-F-LPE, GPIB-FL-LPE
(2) If more than one board (device) that supports the analyzer function is installed in the PC, the
following window appears when you start the analyzer utility. Select the device name set for the
hardware in the property page, then click [Select Board]. (This window does not appear if only one
board is present that supports the analyzer function.)
(3) Click on the [Start Analyze] button. The analyzer utility analyzes the subsequent changes to lines.
When the communication you want to analyze has been completed, click on the [Stop Analyze]
button. The analysis results will be displayed on the screen.
* The name of the board
you have just added is
displayed.
- GPIB-F-LPE
- GPIB-FL-LPE