2. Setup
GP-IB(PCI)L, GP-IB(PCI)
21
For using API-GPLV(W32)
Invoking Configuration Utility
(1) Open the Start Menu, then select “Programs” – “CONTEC API-PAC(W32)” – “GPLV” –
“Configuration Utility”
Updating the Settings
(1) Click on the [Refresh] button, then on the [OK] button.
You have now finished installing the initial setting of Software.
- Select GPIB Board:
Select the board to be used.
- Hard Ware Setting:
Set the I/O address, board ID, and
IRQ.
- IEEE488.2:
Make IEEE 488.2 software settings.
- Interface Name:
From the list, select the board to be
set up.
- GPIB Address:
Set the device address of the board.
The primary address can be set to 0
to 30.
- Termination Methods:
Set the termination format.
- I/O Timeout:
Set the transmit/receive time-out
period.
- System Controller:
Select whether to use the board as a
system controller.
