CONTEC MEDICAL SYSTEMS CO.,LTD
4
Guidance and manufacturer’s declaration – electromagnetic emissions-for
pulse oximeter probe
Guidance and manufacturer’s declaration – electromagnetic emission
The
pulse oximeter probe
is intended for use in the electromagnetic environment specified below. The
customer of the user of the
pulse oximeter probe
should assure that it is used in such and environment.
Emission test
Compliance
Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The pulse oximeter probe uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
RF emission
CISPR 11
Class B
The pulse oximeter probe
is suitable for use in all
establishments, including domestic establishments and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Not Applicable
Voltage fluctuations/ flicker
emissions
IEC 61000-3-3
Not Applicable
Guidance and manufacture’s declaration – electromagnetic immunity –
for pulse oximeter probe
Guidance and manufacture’s declaration – electromagnetic immunity
The pulse oximeter probe is intended for use in the electromagnetic environment specified below. The customer or the user
of pulse oximeter probe should assure that it is used in such an environment.
Immunity test
IEC 60601 test level
Compliance level
Electromagnetic
environment - guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
±
6 kV contact
±
8 kV air
±
6 kV contact
±
8 kV air
Floors should be wood, concrete or
ceramic tile. If floor are covered with
synthetic material, the relative
humidity should be at least 30%.
Power frequency
(50/60Hz) magnetic
field
IEC61000-4-8
3A/m
3A/m
Power frequency magnetic fields
Should be at levels characteristic of
a typical location in a typical
commercial or hospital environment.
