2. Setup
EAD-CE-EC
13
Setting up the hardware in Windows
At startup of Windows, the PCI-to-PCI Bridge used by the Expansion Chassis are detected in sequence
and identified automatically by the Windows standard driver.
After that, the PCI boards installed on the Expansion Chassis are detected in sequence.
For setting up and checking the boards used on the expansion chassis, refer to their respective manuals.
Checking the hardware in Windows
You can use Device Manager to check whether the Expansion Chassis has been identified in Windows.
Device Manager shows “PCI standard PCI-to-PCI bridge” under “System devices”.
Figure 2.5. Sample screen shot of Device Manager
