2. Setup
EAD-CE-EC
11
Step 4 Plugging the PC Card
Make sure that the PC is off and that the AC adapter is already connected, then plug the ExpressCard
[BUS-PC-EC] into the ExpressCard slot in the PC.
Check the direction of the arrow mark
▼
on the PC Card and fit it well into the PC Card slot as shown in
Figure 2.4.
For notes on unplugging the ExpressCard, refer to the manual for your PC.
Figure 2.4. Plugging the PC Card
CAUTION
Take the following precautions not to break the ExpressCard or not to cause its connector to break or
come loose.
-
Do not insert the ExpressCard in reserve or by a procedure other than specified.
-
Do not insert the ExpressCard while holding the connection cable or its connector.
-
Do not move the PC with the connection cable connector plugged.
-
Do not apply excessive force to the connector of the ExpressCard, for example, by forcing the
connection cable connector off the ExpressCard.
-
Do not place anything on the connection cable connector.
