Contec DS-380D Series, User Manual

Page: 62 / 69

5. BIOS Setup
Security
Use this menu to configure system security settings.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the user will
have Administrator rights.
The password must be
In the following range:
Minimum length
3
Maximum length 20
Adiministrator Password
User Password
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Figure 5.26. Security menu
The following items are available:
Administrator Password
When you press <Enter> on this item, you are required to input the password as below.
Create New Password [**** ]
Confirm New Password [**** ]
Enter a password of between 3 and 20 characters twice.
To nullify the password, go to the Administrator Password Input Screen again.
Enter Current Password [**** ]
Create New Password [ ]
Confirm New Password [ ]
When you input old password in the initial item and then press <Enter> by inputting nothing to the new
password item, the password will be nullified.
User Password
When you press <Enter> on this item, you are required to input the password as below.
Create New Password [**** ]
Confirm New Password [**** ]
Enter a password of between 3 and 20 characters twice.
Follow the same procedure as Administrator Password to nullify the password.
CAUTION
Be careful to not forget the password. If you forget the password, the product will have to be
repaired.
DS-380D Series User’s manual
55