Contec DIO-32DM2-PE, User Manual

Page: 59 / 63

6. About Hardware
52
DIO-32DM2-PE
Table 6.1. Specifications < 2 / 2 >
Item Specifications
Bus master section
DMA channels 2channels (one each for input and output)
Transfer bus width 32/16bit width
Transfer data length 8 PCI data length (Max.)
Transfer rate 80 MB/sec.
FIFO 1K data/ch.
Scatter/Gather function 64 MB/ch.
Synchronization section
Control output signal Selection of output signal with the software when specifying a sync master
board.
Control input signal Selection of sync factor with the software when specifying sync slave boards.
Max. board count for
connection 16 boards including the master board
Common section
Allowable distance of signal
extension
1.5m (dependent on wiring environment)
I/O addresses Occupies 2 locations, any 32-ports and 64-ports boundary
Current consumption 3.3V 400mA (Max.) , 12V 30mA (Max.)
Operating conditions 0 - 50°C, 10 - 90%RH (No condensation)
Bus specification PCI Express Base Specification Rev.1.0a x1
Physical dimensions (mm) 169.33(L) x 110.18(H)
Connector PCR-equivalence to it
[mfd. by HONDA TSUSHIN KOGYO CO., LTD.]
Weight 130g
Standard
VCCI Class A, CE Marking (EMC Directive Class A, RoHS Directive)
External Board Dimensions
[mm]
The standard outside dimensions (L) is the distance
from the end of the board to the outer surface of the slot cover.
169.33(L)
11
0.
18
(H
)