DELTA II FLOOR GRINDER
OWNER’S MANUAL AND PARTS BOOK
OIPB
– C15008
3
1 Machine applications
Grinding of horizontal, dry floors such as concrete and steel surfaces with or without a
coating and asphalt using CONTEC
®
grinding tools. The use of the machine outside is only
possible in dry weather.
2 Technical data
DELTA II
Grinding width
490 mm (19 in)
Width
66 cm (26 in)
Length
105 cm (41 in)
Hight
115 cm (45 in)
Weight
175 kg (385 Ibs)
Hose ¢
70 mm (2.86 in)
Motor
9.0 kW (12 hp)
Electric supply
230 V, 3 phases
Honda engine
-
Average value of acceleration a
hv
*
4.3 m/s
2
Noise level L
wa
*
99 dB(A)
Noise level Leq *
99 dB(A)
3 Safety Rules for Operating the DELTA Grinder
Intended application and operation:
Grinding of flat, horizontal, dry surfaces that are typically concrete, asphalt or steel and with
or without a coating. For optimum performance and compatibility always use tools supplied
by CONTEC
®
. Operation of the grinder outdoors is only permitted if the weather is dry.
Attention !
The DELTA floor grinders are constructed according to existing safety rules
and regulations. These technical precautions must not be removed or changed under any
circumstances. While operating the grinder the following points should also be kept in mind:
1 The floor grinder may only be operated by trained professionals. The operators have read
and be familiar the contents of this manual.
2 The floor grinder must not be operated in areas where the hazard of explosion or fire
exists.
3 The grinder should only be activated when the tools are lifted from the floor by the lifting
device (Appendix diagram No. 63 and 65).
4 The tools and discs may be hot after use. Take care when changing them.
5 Never operate the floor grinder on a sloping surface.
