3. External Connection
32
COM-1(LPCI)H,
COM-2(LPCI)H, COM-4(LPCI)H
In the case of COM-4(LPCI)H
When using a COM-4(LPCI)H, an alternative to connecting an external device directly to the connector
on the board is to use a connection conversion cable.
Using the 9-pin D-SUB Connector Conversion Cables
Use a PCE44/9P4S connection conversion cable (purchased separately) to connect to external devices
after dividing into four 9-pin D-SUB male connector channels.
Use cable suitable for use with 9-pin D-SUB connectors (purchase separately) with the four divided
connectors.
- Connector used
44-pin D-SUB, male connector
Thumb screw :
UNC #4-40 (inch screw)
- Cable
9-conductor shielded cable
Cable length : 250mm
Conductor size : AWG#28
- Connector used
9-pin D-SUB, male connector
Thumb screw : UNC#4-40(inch screw)
- Applicable connectors
17JE-13090-02(D8C) (mfd. by DDK, Female)
SG 1
DTR 1
TxD 1
RxD 1
DCD 1
9
8
7
6
RI 1
CTS 1
RTS 1
DSR 1
5
4
3
2
1
CH1
SG 4
DTR 4
TxD 4
RxD 4
DCD 4
9
8
7
6
RI 4
CTS 4
RTS 4
DSR 4
5
4
3
2
1
CH4
CH1
CH2
CH3
CH4
Figure 3.6. Specification of “PCE44/9P4S”
Connection conversion (Option)
Connection Conversion Cable (44M
→
9M
x
4, 250mm)
PCE44/9P4S
Cable (Option)
RS-232C Straight Cable with D-SUB9P (1.8m)
RSS-9M/F
RS-232C Cross Cable with D-SUB9P (1.8m)
RSC-9F
RS-232C Connection Conversion Straight Cable (25M
→
9F, 1.8m)
RSS-25M/9F
RS-232C Connection Conversion Cross Cable (25F
→
9F, 1.8m)
RSC-25F/9F
