Programming SmartKeys
Programming SmartKeys
™
™
1. Press [DEVICE], then [CABLE] to select cable mode
1. Press [DEVICE], then [CABLE] to select cable mode
2. Press [CABLE], then [SELECT]
2. Press [CABLE], then [SELECT]
together
together
until [CABLE]
until [CABLE]
button lights up (approx. 2 - 3 seconds)
button lights up (approx. 2 - 3 seconds)
3.
3.
In this order
In this order
press [TV], [DEVICE], [TV], [0], [3] (may be
press [TV], [DEVICE], [TV], [0], [3] (may be
2 or 4)
2 or 4)
4. Press [CH ^
4. Press [CH ^
] to store the setting
] to store the setting
5. The [CABLE] button will blink and go out
5. The [CABLE] button will blink and go out
To program [CABLE] Smartkey ™ to turn on the cable set-top
device and TV, then tune the TV to output CH 3
