Contec bx200 SERIES User Manual Download Page 3

Page: 3 / 115

BX-2x0-DCxxxx,

BX-2x0D-DCxxxx

User’s

manual

Product Configuration Image

* See the Product Configuration List to check if all the components are included for the specified number of units.

Copyright

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this

document.

The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for results obtained by the user as a result of using this product.

Trademarks

Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS, Microsoft

and Windows are trademarks of Microsoft Corporation. Other brand and product names are trademarks

of their respective holder.

Summary of Contents for bx200 SERIES




















































































































Search results

Summary of Contents for bx200 SERIES

Reviews:

Related manuals for bx200 SERIES

Brands by name

Popular brands

Contec bx200 SERIES, User Manual

Search results

Summary of Contents for bx200 SERIES

Reviews:

Related manuals for bx200 SERIES

Brands by name

Popular brands