3. External Connection
Cable connection
When connecting the product to an external device, you can use the supplied connector plug.
For wiring, strip off approximately 9 - 10mm of the covered part of a wire rod and then insert it to the
opening. After the insertion, secure the wire rod with screws. Compatible wires are AWG 28 - 16.
CAUTION
Removing the connector plug by grasping the cable can break the wire.
9 - 10mm
- Applicable plug(accessory bundled)
14 pin (Screw Terminal)
Plug header
Figure 3.4. Connecting an Interface Connector and Connectors That Can Be Used
AIO-160802AY-USB
23
