6. About Hardware
AI-1216B-RB1-PCI, AI-1216B-RU1-PCI
41
AI-1216B-RU1-PCI
Table 6.2. Specification < AI-1216B-RU1-PCI >
Item
Specification
Analog input
Isolated specification
Un-Isolated
Type
Single-Ended Input
Number of input channels
16 channels
Input range
Unipolar 0-10V
Absolute max. input voltage
±12V
Input impedance
1M
Ω
or more
Resolution
12-bit
Non-Linearity error *1*2
±3LSB
Conversion speed
20
µ
sec/ch (Max.)
Buffer memory
No buffer memory
Conversion start trigger
Software
Conversion stop trigger
Software
Digital I/O
Number of output channels
Un-Isolated output 8ch (TTL level positive logic)
Number of input channels
Un-Isolated input 8ch (TTL level positive logic)
I/O address
Any 32-byte boundary
Interrupt level
1 level use
Power consumption
+5V 200 mA (Max.)
Operating condition
0 - 50°C, 10 - 90%RH (No condensation)
Bus specification
PCI(32-bit, 33MHz, Universal key shapes supported *3)
Dimension (mm)
121.69mm(L) x 88.00mm(H)
Interface connectors
CN1
D-SUB 37-Pin female connector #4-40UNC
Weight
80g
*1: When the environment temperature is near 0ºC or 50ºC, the non-linearity error may become larger.
*2: At the time of the source use of a signal which built in the high-speed operational amplifier.
*3: This board re5V power supply from expansion slots (it does not operate in the environment of only +3.3V
power supply).
Board Dimensions
121.69(L)
88
.0
(H
)
[mm]
The standard outside dimension (L) is
the distance from the end of the board
to the outer surface of the slot cover.
