Contec ADI12-8(USB)GY, User Manual

Page: 18 / 69

3. Setup
ADI12-8(USB)GY
11
3. Setup
Connection-Overall Diagram
This is connection-overall diagram. Please reference to this page for actual
connection.
Figure 3.1. Connection-Overall Diagram
Setting a Module ID
The host computer distinguishes and keeps track of the modules of same model by
assigning Module IDs to them. Factory settings “00” can be used when only one
module per model is connected to one computer.
Each module should be assigned a unique Module ID in the range of 00 - 7Fh when
several modules with the same model are being connected.
There are two rotary switches, moreover, “x16” and “x1” represent high bits and low
bits of Module ID respectively.
Figure 3.2 Setting a Module ID
Module ID 00h
[Factory Settings]
Module ID 12h
[Factory Settings]
Module
ID(x16)
Module
ID (x1)
[0]
[0]
Module
ID(x16)
Module
ID (x1)
[1]
[2] 0
1
2
34
56
7
9
A
C E
F
8
0
1
2
34
56
7
9
A
C E
F
8
0
1
2
34
56
7
9
A
C E
F
8
0
1
2
34
56
7
9
A
C E
F
8
Software Installation
(Page 12)
Connecting to a PC
(Page 15)
Connecting to an External
Device (Page 19)
Connecting with
Expansion
Accessories
(Page 47)
Mounting on a DIN
Rail (Page 30)