Contacta STS-K009, Installation & User Manual

Page: 5 / 16

5
1. Place the amplifier under a staff counter, ensuring that it will not obstruct
staff when they are sitting.
2. Mark the four fixing points for the amplifier under the counter.
3. Drill and fix the amplifier in place using the supplied screws.
4. Install the amplifier’s power supply close to a power socket outlet using
the supplied mounting bracket and fixing screws.
Fixing points
Amplifier Installation
Amplifier Connections
After all relevant components have been installed, connect all green plugs to
the sockets at the rear of the amplifier following the layout detailed below.
LED connection or alert tone (if required)
Confidence LED to confirm the system is powered
or an alert tone for the attention of staff
Staff microphone connection
Customer microphone connection
Confidence LED (if required) for status alerts
and fault detection
Hearing loop aerial
Line in connection for
external audio source
Staff speaker connection
Customer speaker connection
Power input
connection
Use power supply
through ground
supply only
Amplifier Installation