Avoiding material damage
en
17
¡
Changes to the electrical or mechanical
assembly are dangerous and may lead to
malfunctions.
▶
Do not make any changes to the elec-
trical or mechanical assembly.
¡
The light emitted by LED lights is very
dazzling, and can damage the eyes (risk
group 1).
▶
Do not look directly into the switched-
on LED lights for longer than
100 seconds.
WARNING ‒ Risk of electric shock!
¡
If the appliance or the power cord is dam-
aged, this is dangerous.
▶
Never operate a damaged appliance.
▶
Never pull on the power cord to unplug
the appliance. Always unplug the appli-
ance at the mains.
▶
If the appliance or the power cord is
damaged, immediately unplug the
power cord or switch off the fuse in the
fuse box.
▶
▶
Repairs to the appliance should only
be carried out by trained specialist
staff.
¡
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only
be carried out by trained specialist
staff.
▶
Only use genuine spare parts when re-
pairing the appliance.
▶
If the power cord of this appliance is
damaged, it must be replaced by the
manufacturer, the manufacturer's Cus-
tomer Service or a similarly qualified
person in order to prevent any risk.
¡
An ingress of moisture can cause an elec-
tric shock.
▶
Before cleaning, pull out the mains
plug or switch off the fuse in the fuse
box.
▶
Do not use steam- or high-pressure
cleaners to clean the appliance.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic
cleaning agents in conjunction with alu-
minium parts in the interior of the appli-
ance may cause explosions.
▶
Never use highly caustic alkaline or
highly acidic cleaning agents. In partic-
ular, do not use commercial or indus-
trial cleaning agents in conjunction with
aluminium parts, e.g. grease filter on
extractor hoods.
Avoiding material damage
Follow these instructions to prevent material damage to
your appliance, accessories or other objects in your kit-
chen.
ATTENTION!
¡
Condensate may cause corrosion damage.
▶
To prevent condensation from building up, switch
on the appliance during cooking.
¡
If moisture gets into the controls, this may result in
damage.
▶
Never clean controls with a wet cloth.
¡
Incorrect cleaning damages the surfaces.
▶
Follow the cleaning instructions.
▶
Do not use harsh or abrasive detergents.
▶
Clean stainless steel surfaces in the direction of
the finish only.
▶
Never clean controls with stainless steel clean-
ers.
¡
Condensation that flows back in may damage the
appliance.
▶
The air extraction duct must be installed with a
gradient of at least 1° from the appliance.
¡
If you put incorrect stress on the design elements,
they may break off.
▶
Do not pull design elements.
▶
Do not place objects on the design elements or
hang objects from them.
Environmental protection and saving energy
Help protect the environment by using your appliance
in a way that conserves resources and by disposing of
reusable materials properly.
Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
▶
Sort the individual components by type and dispose
of them separately.
Summary of Contents for 4242004251378 / 1 ST
Page 55: ......
