66001327 Iss 01
7. Set 7-day programme
06:00
10
20
08:00
19ºC
4ºC
ºC
12:00
22ºC
14:00
16:00
16ºC
22ºC
10ºC
22:00
PROGRAM 1
PROGRAM 2
PROGRAM
3
PROGRAM
4
PROGRAM 5
PROGRAM 6
An example of one day programme on PVE
TIM
E S
ETT
IN
G
PROGR
A
M
M
E SET
TIN
G
- SET MINUTES
- SET DAY
- SET HOURS
- SELECT DAY TO SET
- SET MINUTES FOR PROGRAM
- SELECT PROGRAM TO SET
- SET TEMPERATURE FOR PROGRAM
Logic diagram for setting programme on PVE
PROG
-
+
1.
Press and hold PROG for 5 seconds to enter the
time setting.
2.
The day will be flashing.
3.
Use
+
and
-
to navigate day, press PROG to
select day.
4.
PROG 1 will be flashing. Use
+
and
-
to navigate
programme, use PROG to select programme.
5.
The minutes will be flashing.
6.
To set minutes, use
+
and
-
to change minutes,
press PROG to set the minutes.
7.
The hour will be flashing
8.
To set hour, use
+
and
-
to change hour, press
PROG to set the hour.
9.
The temperature will be flashing.
10. To set temperature, use
+
and
-
to change
temperature, press PROG to set temperature.
To add another programme repeat steps 2-10.
The PVE has a 7-day timer with up to 6 programming
steps available for each day. In the programming you
can set a start time and a temperature for each
program. This can be changed to a 5-day + 2-day
timer, or a 24 hour timer in the settings menu.
Instructions on doing this can be found in section 9.
Set programme inactive.
If you do not require the use of all 6 programs they can
be set as inactive. When in programming mode select
the programme you want to make inactive and press
the TIME button. If the programs is inactive the display will
show “
- -:- -
”. To activate the program again, press the
TIME button.
5
Copy day function.
If you require the same set of programs throughout
the week, hour timer is available. This will use the
same program every day. A 5-day + 2-day timer is
also available. This will use the same programs
Monday-Friday, and the same programs Saturday
and Sunday. These modes are enabled in the setup
menu, as explained in section 9.
Alternatively, it is possible to copy a program from
one day to another.
To do this, when programming the 7-day timer, press
and hold the TIME button. This will bring you to the
copy day mode. To select which day you wish to
copy from, use the PROG button to cycle through
numbers 1-7 on the screen, this relates to which day
you would like to copy. 1=MON, 2=TUE, 3=WED etc.
To select which day you would like to copy the pro-
grams to, use the
+
&
-
to navigate to the day. Once
both are selected, press the time button to copy the
day. The TO should flash to confirm it has been suc-
cessful.
-
SET HOUR FOR PROGRAM