66001327 Iss 01
Before you can use the PVE, it has to be activated by
pressing any of the TIME, PROG, TEMP or MODE
buttons once. The LCD backlight will turn on. To
operate any control button, press within 2 seconds of
activation.
The PVE has a standby mode. Standby mode can be
accessed by pressing the standby button. In this
mode, the timer is locked and none of the control
buttons will work. The heating is disabled. To exit
standby mode, press the standby button.
This mode can be used to provide frost protection. A
minimum temperature can be set in the settings
menu. Standby mode will always maintain this
minimum temperature. ‘FROST PROTECTION’ will
appear on the screen in standby mode when a
minimum temperature is set.
Information on setting the minimum temperature can
be found in section 9.
-
Press and hold the TIME button for 5 seconds.
Minutes are flashing - use
+
and
-
buttons to set
minutes.
-Press TIME button
Hours are flashing - use
+
and
-
buttons to set
hours.
-Press TIME button
Day is flashing - use
+
and
-
buttons to set Day.
Once set, press TIME to return to main screen. The PVE
has a battery backup, so the time and day settings
are saved in the event of power being lost.
1. Basic Operation
2. Time and day setting
3. Selecting operating mode
PVE has 3 operating modes:
BOOST, MANUAL, and AUTO
Pressing the MODE button whilst in the main menu will
toggle between BOOST, MANUAL and Auto mode.
5. Manual Mode
In Manual mode, the heater maintains the set
temperature.
To amend the set temperature when in
MANUAL
mode, activate the display and then press TEMP.
Next, use the
+
and
-
buttons to change the
temperature. Once the temperature is set, you can
leave the display to return to the main screen and the
settings will be saved.
4. Boost mode
The boost feature increases the room temperature for 15
minutes.
To amend the set temperature when in
BOOST
mode,
activate the display and then press TEMP. Next, use the
+
and
-
buttons to change the temperature. Once the
temperature is set, you can leave the display to return to
the main screen and the settings will be saved. After 15
minutes, the PVE will return to previous operating mode.
Whilst in boost mode, activate the display and press the
PROG button to increase the boost period. The boost
period can be increased up to 4 hours. This will reset
back to 15 minutes once you exit boost mode.
In this mode, the PVE will follow the week’s time /
temperature program.
The temperature can be temporarily overridden in
AUTO
mode by simply activating the display and using the
+
and
-
buttons to set the new temperature. The new set
temperature will be then maintained until the next
program step.
Advance mode can be used to advance to the next
program. To do this, press PROG whilst in Auto mode.
To clear advance mode, press PROG.
6. Auto mode
4