8. Set 7-day programme
06:00
10
20
08:00
19ºC
4ºC
ºC
12:00
22ºC
14:00
16:00
16ºC
22ºC
10ºC
22:00
PROGRAM 1
PROGRAM 2
PROGRAM
3
PROGRAM
4
PROGRAM 5
PROGRAM 6
An example of one day programme on PLE
TIM
E S
ETT
IN
G
PROGR
A
M
M
E SET
TIN
G
- SET MINUTES
- SET DAY
- SET HOURS
- SELECT DAY TO SET
- SET MINUTES FOR PROGRAM
- SELECT PROGRAM TO SET
- SET TEMPERATURE FOR PROGRAM
Logic diagram for setting programme on PLE
PROG
MODE
TEMP
1.
Press and hold PROG for 5 seconds to enter the
time setting.
2.
The day will be flashing.
3.
Use TEMP and MODE to navigate day, press
PROG to select day.
4.
PROG 1 will be flashing. Use TEMP and MODE to
navigate programme, use PROG to select
programme.
5.
The minutes will be flashing.
6.
To set minutes, use TEMP and MODE to change
minutes, press PROG to set the minutes.
7.
The hour will be flashing
8.
To set hour, use TEMP and MODE to change
hour, press PROG to set the hour.
9.
The temperature will be flashing.
10. To set temperature, use TEMP and MODE to
change temperature, press PROG to set
temperature.
To add another programme repeat steps 2-10.
The PLE has a 7-day timer with up to 6 programming
steps available for each day. In the programming you
can set a start time and a temperature for each
programme. Each programme has to be used.
9. Advance mode
Press PROG from PROG mode to bring forward the next
programme. To clear advance mode, press PROG.
11 Keys locking
Press and hold TIME and TEMP together for 5 seconds. The
display will show symbol. Repeat the step to unlock.
10. Heat symbol on the display
Every time there is a demand for heat, the display will
show the heat icon.
- reduced heat output when the room temperature is
close to the set temperature.
- full heat output
12. Status light on the heater
Light colour Heater status
STAND-BY No heat output
Reduced heat output
Full power heat output
5
66000852 Iss 02
