3
I3984069 Iss 03
- SET HOURS FOR PROGRAM
TIM
E S
ETT
IN
G
PROGR
A
M
M
E SET
TIN
G
- SET MINUTES
- SET DAY
- SET HOURS
- SELECT DAY TO SET
- SET MINUTES FOR PROGRAM
- SELECT PROGRAM TO SET
- SET TEMPERATURE FOR PROGRAM
10. Set 7-day programme (cont’d)
1. Touch and hold for 5 seconds to enter the time
setting.
2. The minutes will flash.
3. Tap or to set the minutes.
4. To set hour, tap and the hour will begin to flash.
5. Tap or to set the hour.
6. To set day, tap and the day will begin to flash.
7. Tap or to select the day.
8. Tap to access the 7-day programming mode.
9. Tap or to select the day you want to set.
10. Tap to set programme 1 for selected day.
This is indicated by the flashing number.
11. Tap to select minutes.
12. Tap or to set minutes.
13. Tap to select hour.
14. Tap or to set hour.
15. Tap to select temperature setting.
16. Tap or to set temperature.
Logic diagram for setting programme on CRX2
14. Advance mode
Tap from SETB or PROG mode to bring forward next
programme. To clear advance mode, tap .
15. Keys locking
Tap and hold together for 5 seconds. The display will
show symbol. Repeat the step to unlock.
10. Set 7-day programme (cont’d)
The CRX2 has a 7-day timer with up to 6 programming steps
available for each day. In the programming you can set a
start time and a temperature for each programme. Each
programme has to be used or set inactive.
12. Copy day function
The CRX2 allows you to copy a day’s heating programme to
save time re-entering the same time and temperature settings
for a day.
1. To use a copy day function, enter the programming
mode.
2. To skip time setting, tap to cycle through hour and day.
3. On the next tap, the Programme mode is activated and
the day will flash.
4. Tap to activate the COPY DAY function.
5. Tap to select the day you want to copy the
temperature settings from.
6. Tap or to select the day you want to copy the
temperature settings to.
7. Tap to confirm the selection.
The ‘to’ word will flash to indicate that the day programme
has been copied to the day selected.
8.
Tap to go back to the Programme mode.
11. Set programme inactive
To deactivate a programme, enter the programming mode.
Select the programme you want to make inactive and
tap . The time and temperature will now be dashes to
indicate that the programme has been deactivated. In order
to re-activate the temperature setting, tap again.
16. Heat symbol on the display
Every time there is a demand for heat, the display will show
the heat icon.
- reduced heat output when the room temperature is
close to the set temperature.
- full heat output
13. Fan function - only available for fan heaters
Tap any control icon to activate the CRX2. Tap to
activate or deactivate the fan function.