Consew 104-1T, Parts Book And Instruction Manual

Page: 10 / 38

LEARNING TO OPERATE THE MACHINE
NOTE: When in operation the machine pulley must always turn over away
from operator.
Mark a design (see Fig. 6) on a 12 inch
square piece of cloth.
Place cloth under presser foot so that
needle will enter cloth at point 1. Turn handle K,
Fig. 3 to the right and the hook of the needl e
will be turned in the sam e direction. Lower
presser foot, start machine pulley by turning it
over away from you, grasp handle K and pull it
down to st art the machine. With handl e
depressed and to the right, cloth will be fed to
point 2, then turn handle to the front and cl oth
will be fed to point 3, turn handle to the left and
cloth will be fed to point 4, etc.
To stop machine raise handle K. machine will stop with needle as its
highest point.
TO OPERATE THE MACHINE
The operator should practice embroi dering designs similar to those
illustrated below:
Fig. 7. Designs for beginners
These designs can be sketched on w hite material such as lawn, and by
following them, the operator can soon become proficient enough to attempt
more intricate designs or patterns.
9
Downloaded
from
www.aberdeensewing.com