With the right hand, turn handle (A) straight to the left, having started the
machine, quickly bear down and up on handle (A) so the needle will pick up the
thread for one stitch. Keep handle (A) in same position and with the threading wire
(B), draw thread directly toward you, laying end of thread loosely on needle plate
after t comes up thread needle hole.
2) For the cord (Fig. 7)
Wind the cord
on the cord spool
, using the spool winder spindle on the
pulley. Place it on the cord spool bracket
. Inter the cord into the top of needle
bar
with the threading wire (large)
and pass it below the end of nipple
carrier 6, then through to the hole of the nipple
.
3) For the braid (Fig. 7)
Wind the braid
on the braid spool
, using the spool winder spindle on the
pulley. Place it on the braid spool bracket
. Pass the braid through the braid
guide
of the bracket
and through the hole
of the braid leader rod and
the hole
of the braid leader bracket, then through the forward hole
of the
braid leader guide.
Now the machine is ready for operation.
8
Downloaded
from
www.aberdeensewing.com
