89
X
X
X
X
X
6. "LIGHTING" menu, setting the background lighting
This menu allows you to set the switch-on time for the background lighting which switches on automatically upon
touching the screen and switches off again after a settable time. You can set either OFF (lighting always off), times
between 5 seconds and 10 minutes and permanent light (ON). And you can specify times during which the lighting
is to be permanently activated.
You can also activate/deactivate the automatic adjustment to the ambient lighting conditions so that the display can
be read optimally under nearly any light conditions.
The background lighting can only be used if the weather station is mains operated (not when it is battery-
powered!).
• Select the "LIGHTING" menu:
NEXT LIGHTING ENTER
NEXT LIGHTING ENTER
NEXT LIGHTING ENTER
NEXT LIGHTING ENTER
NEXT LIGHTING ENTER
• Touch "ENTER" and you will see:
LIGHTING + 10 SEC -
LIGHTING + 10 SEC -
LIGHTING + 10 SEC -
LIGHTING + 10 SEC -
LIGHTING + 10 SEC -
• Touch "+" or "-" to set the switch-on time.
• Touch "LIGHTING" and you will see:
BRIGHT CTRL ON
BRIGHT CTRL ON
BRIGHT CTRL ON
BRIGHT CTRL ON
BRIGHT CTRL ON
• Touch "ON" to switch the display between automatic brightness control active (ON) or deactivated (OFF).
• Touch "BRIGHT CTRL" and you will see:
BEGIN + 16.00 -
BEGIN + 16.00 -
BEGIN + 16.00 -
BEGIN + 16.00 -
BEGIN + 16.00 -
• Touch "+" or "-" to set the switch-on time for the lighting (permanent lighting).
• Touch "BEGIN" and you will see:
END + 23.45 -
END + 23.45 -
END + 23.45 -
END + 23.45 -
END + 23.45 -
• Touch "+" or "-" to set the switch-off time for the lighting (permanent lighting).
• Wait a few seconds and the station will return to normal mode and your settings will be activated.