77
f) Startup
• After connecting the mains adapter, a short test of all display segments is started (all segments are displayed).
• An acoustic signal sounds next and the version number of the weather station is displayed.
• Then the indoor temperature and indoor humidity and the barometric pressure are displayed. The corresponding
sensors are installed directly in the display console.
• Now you must install the external sensors.
g) Combination sensor
The combination sensor is delivered in parts and must be assembled before startup.
Take the wind vane and the white cylindrical enclosure of the vane, the combination sensor and the poles out of the
packing.
Mount the wind vane as follows:
1. Place the cylindrical enclosure of the wind vane on
the free pole end of the combination sensor sup-
port as shown in the picture.
The bevelled end of the cylindrical enclosure faces
downwards.
2. Guide the connector with the cable through the
base of the wind vane.
Be careful not to damage the connector or twist the
cable.
1
2
¨
¨