77
• Where a DCF signal could not be received (e.g. due to unsuitable installation site), the reception attempt can be
repeated.
For this, press the button "
" (19) until the radio mast icon in the lower left of the display disappears. DCF reception
is now switched off. Release the button.
Then press the button "
" (19) again until the radio mast icon flashes. Then release the button.
The receiver unit performs another search for the DCF signal as described above.
• The base (24) on the back of the receiver unit can be used to set it up in a suitable position.
For wall installation by a nail or screw, there is a suitable opening (22) on the back of the receiver unit. First remove
the base (24). It can simply be pulled out downwards.
For placing/installation, select a place that is not exposed to direct sunlight (this will cause wrong measured value
for inner temperature/humidity). Also keep sufficient distance to heaters, windows or doors.
For good radio reception, the receiver unit should be as far as possible from electric/electronic devices, metal parts,
cables, etc.
Protect expensive furniture surfaces with suitable pads. Otherwise, they may be scratched.
• Commissioning is now completed.