![background image](http://html1.mh-extra.com/html/conrad/sygonix-1597114/sygonix-1597114_instruction-manual_2653999027.webp)
- 27 -
Function – Night light mode
Night light mode works in conjunction with the
manual control of the gateway indicator light.
See chapter
Gateway – Indicator light
.
Option 1 – Without motion sensor
ON
When night falls, the gateway indicator light
comes on, and goes off again when daylight is
measured.
Option 2 – With motion sensor
e.g. 1 min
ON
Option 2 works the same as Option 1 but is
additionally controlled through motion sensing
and a timer as follows:
■
If movement is detected during the night,
the gateway indicator light goes on and off
again after expiry of a pre-set timer.