- 19 -
Sensors – Sensor types
The gateway itself features the following built-in
sensors:
■
Light sensor
■
Noise sensor
■
Pressure sensor
Other sensors are external sensors, which can
be added and removed again if required.
The gateway sensors cannot be removed.
Sensors – Add sensor
Only sensors compatible with the Sygonix
Home Starter Kit can be added.
1. Turn the external sensor on.
2. Select the gateway from the device list to
which you want to add the sensor.
3. Touch
+Add New Sensor
.
4. Select the the sensor you want to add.
5. Follow the on-screen instructions.
-
Start and end of the procedure are
confirmed by signal sounds.
-
If you attempt to add a sensor a second
time, the instructions window does not
close. Touch
Cancel
to close, then
<
to
reach the landing page.
6.
Wait for the confirmation window, then touch
OK
.