40
Switching speed alarm on/off
• Activate the display of limit values as described at the
beginning of chapter 15. b). Also see illustration to the
right.
• Hold down the "SEL" button (C) until the alarm symbol
"
" is displayed in the bottom right-hand corner (alarm
on) or disappears (alarm off).
• If the alarm is on, the heart rate monitor will play an alarm signal when the current
speed is above the upper limit value or below the lower limit value.
c) "STEPS" function
Press the "SEL" button (C) in "PEDO" mode until "STEPS"
is displayed at the bottom.
The number of steps is shown in the lower display line (see
arrow in the illustration on the right).
To reset the number of steps, hold down the "SET" button
(A) for 3 seconds.
d) "ODOMETER" function (total distance)
Press the "SEL" button (C) in "PEDO" mode until "ODOMETER" is displayed at the
bottom.
The total distance is shown in the lower display line (see
arrow in the illustration on the right).
To reset the total distance, hold down the "SET" button (A)
for 3 seconds.
