background image

Declaration of Conformity (DOC)

We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that 

the product conforms to the fundamental requirements and the other relevant regulations of 

Directive 1999/5/EC.

 

You can find the declaration of conformity at www.conrad.com. 

Technical Data

Reception frequency .....................433 MHz
Operating voltage .........................230 V/AC, 50 Hz
Protection class ............................I
Light source ..................................max. 100 W light bulb; E27
Range ...........................................approx. 25 m
Dimensions (Ø x H) ......................approx. 62 x 100 mm 
Operating temperature .................0 °C to +35 °C

  

   This  is  a  publication  by  Conrad  Electronic  SE,  Klaus-Conrad-Str.  1,  D-92240  Hirschau 

(www.conrad.com). 

 

 All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, 

or the capture in electronic data processing systems require the prior written approval by the editor. 

Reprinting, also in part, is prohibited. This publication represent the technical status at the time of 

printing. 

   

© Copyright 2015 by Conrad Electronic SE.

Handling

  •   The wireless light switch is only intended for use in dry indoor locations.

 

•   The following unfavourable conditions should be avoided at the installation site 

and during transport:

 

  - Humidity and damp

 

  - Direct sunlight

 

  - Extreme cold or heat

 

  - Dust or flammable gases, fumes or solvents

 

  - Strong vibrations

 

  -  Strong magnetic fields such as those found in the vicinity of machinery or louds-

peakers

 

•   Ensure that the insulation for the entire product is neither damaged nor destroyed. 

Never disassemble the product! There are no serviceable parts inside.

 

•  Check the product for damage before use!

 

  If you notice any damage, do not use the product any longer!

 

  There is a risk of a life-threatening electric shock!

 

  Safe operation must be presumed to be no longer possible:

 

  - if the device is visibly damaged

 

  - if the device no longer works

 

  - if the device was stored under unfavourable conditions for a long period of time 

 

  - the device was exposed to extraordinary stress caused by transport.

Transmission range

The transmission range of the radio signals, between the radio transmitter and the wireless light 

switch, is up to 25 m under optimum conditions.

   This value, however, is the so-called „open space range“ (range the trans-

mitter and receiver are visible to each other, without interfering influences).

 

 In practical operation, however, there are walls, ceilings of rooms etc. between 

the transmitter and the receiver, which reduce the range accordingly.

 

 Due to the different influences on the radio transmission, no specific range 

can be guaranteed.

 

However, trouble-free operation is usually possible in a detached house.

The range can sometimes be limited considerably by:
•  walls, reinforced concrete ceilings
•  coated/metallised insulated glass
•  proximity to metal & conducting objects (e.g. radiators)
•  proximity to human bodies
•   Broadband interferences, e.g. in residential areas (DECT telephones, mobile phones, radio-

controlled headphones, radio-controlled speakers, radio-controlled weather stations, baby 

phones etc.)

•  Proximity to electric motors, transformers, power-supply units, computers
•   The proximity to improperly shielded or uncovered operating computers or other electric ap-

pliances

Disposal

 

 

Please dispose of the device when it is no longer of use, according to the current 

statutory requirements.

Summary of Contents for RSLR2









Reviews: