background image

26    Network configuration

Powerline Adapter PL500D N150

Synchronisation with an Internet time server is necessary to be able to use 
the parental controls. In this case, the time server (

Device configuration

 -> 

Date and time

 -> 

Obtain date and time automatically

) for the 

PL500D N150 has to be enabled and an active Internet connection is also 
required (see 'Time server'). The time server is enabled by default.      
If you would like to set up a daily time quota, enable the option Turn on paren-
tal controls. Now enter the MAC addresses for the stations for which you 
would like to set up a time quota. You can enter the MAC addresses manually 
or select them from the list of currently known stations (

WLAN status

 -> 

WLAN monitor

). Confirm each entry with 

Add

.

WLAN stations with time limit 

Here you can find a list all of the Wi-Fi stations for which the Internet access 
time is limited. 
Each station is displayed with its MAC address, name, time remaining and 
the specified time quota. 
If you would like to delete a station from this list, highlight the station and con-
firm with 

Delete

 selected. 

Clicking on 

Edit

 brings you to the settings menu for the time quota. If you 

would like the time quota to be monitored, enable the option The time limit will 
be monitored.    
The daily time quota can be specified in hours and minutes. 

A time quota can only be used if it matches the time periods defined in the 
WLAN time control and if the PL500D N150 is enabled and there is an Inter-
net connection. (see 'WLAN time control'). 

The time quotas for the parental controls are defined per day and the time 
periods for WLAN time control are defined per weekday. 

If you expand an ongoing time quota, the change takes effect immediately; if 
you reduce an ongoing time quota, the change takes effect on the following 
day. 

4.5.5

WLAN time control

Synchronisation with an Internet time server has to be ensured in order to use 
Wi-Fi time control. In this case, the time server (

Device configuration

 -> 

Date and time 

-> 

Obtain date and time automatically

) for the 

Summary of Contents for PL500D N150







































Reviews: