10 Quickstart
Powerline Adapter PL500D N150
adapters, then press the encryption button (approx. 1 second) of your
new PL500D N150 within two minutes.
���
That's it! The new PL500D N150 is now integrated into your existing PLC
network.
���
In order to connect the PL500D N150 with your laptop, tablet or smart-
phone by Wi-Fi, enter the previously noted WiFi key as the network secu-
rity key.
Begin carrying out the configuration of your network in order to secure your
Wi-Fi network in a customised manner. For more information, refer to Chap-
ter 'Network configuration'.
Encrypting a new PLC network with one or more PL500D N150 and one
PL500D duo (see 'Package contents')
Note the WiFi key of the PL500D N150 before the networking procedure. You
will find the unique adapter key on the label on the back of the housing.
���
Connect the PL500D duo adapter to your Internet access device's net-
work jack.
���
Plug the PL500D N150 into a wall socket. As soon as the indicator light
of the PLC button lights green (after approx. 45 seconds), the adapter is
ready to operate.
If you only want to use the Wi-Fi function on the PL500D N150, plug the
adapter into a power outlet, without any cables whatsoever. You can also
connect the PL500D N150 to the network jack of a network device, such as
a computer, with a commercially available network cable. (see 'Example
applications')
Note: The power outlet should be in range of the connected network device.
The PL500D N150 with the cable-based network device should be easy to
access.
To switch off the PL500D N150 or disconnect it from the mains supply, pull
the power plug out of the power outlet.
���
After you have successfully connected both adapters, press first the PLC
button of the PL500D duo (approx. 1 second) and then the PLC button of
the PL500D N150 (approx. 1 second) within two minutes.
���
That's it! Your PLC network is now protected against unauthorised
access.
