• Do not touch the mains cable if there are any signs
of damage. Power down the respective mains socket
(e.g. via the respective circuit breaker), and then ca-
refully unplug the mains plug from the mains socket.
Never use the product if the mains cable is damaged.
• Never insert or unplug the mains plug when your
hands are wet.
Additional safety instructions – Model T8/T6/T6 Lite/FD 100
a) Power supply
• Observe data on connection in the operating instruc-
tions.
• Use a suitable and stabilized DC voltage source as
power supply.
•
The power source must be able to supply sufficient
current to reach the output data.
Notes on rechargeable batteries
Always make sure that you have read and understood the following information and safety instructions before
handling rechargeable batteries.
Also read and observe the notes provided with the rechargeable battery!
Charge rechargeable batteries approximately every 3 months; otherwise, there is a risk of the rechargeable battery
becoming completely discharged due to self-discharge. In this case, the rechargeable batteries will no longer be
usable.
a) Safety instructions
• Always follow the manufacturer instructions of the re-
chargeable battery.
• Rechargeable batteries are not toys. Keep rechargea-
ble batteries away from children.
• Do not leave rechargeable batteries lying around unat-
tended. Children or pets may swallow them. If rechar-
geable batteries have been swallowed, seek medical
attention immediately!
• Handle rechargeable batteries with care; use suitable
protective gloves.
• Dispose of rechargeable batteries in an environmen-
tally friendly manner.
• Rechargeable batteries must not be short-circuited,
disassembled or thrown into a fire. This may cause a
fire or explosion!
• Leaking or damaged rechargeable batteries can cause
corrosive injuries in case of contact with the skin.
Therefore you should use suitable protective gloves
for this.
• Do not recharge normal, non-rechargeable batteries.
This may cause a fire or explosion!
• Rechargeable batteries must not become wet or
damp.
• Do not leave rechargeable batteries unattended while
charging/discharging.
• Pay attention to the correct polarity (plus pole/+ and
minus pole/-). Both the product and the rechargeable
battery will be damaged if rechargeable batteries are
improperly installed. This may cause a fire or explo
-
sion!
• Do not charge/discharge rechargeable batteries that
are still hot. Before charging or discharging rechar-
geable batteries, allow them to cool down to room
temperature.
• Do not charge/discharge damaged, leaking or defor-
med rechargeable batteries. This may cause a fire or
explosion! Do not use such rechargeable batteries
anymore and secure them against re-use.
• Dispose of unusable rechargeable batteries in an envi-
ronmentally friendly manner.
• Do not use rechargeable battery packs that consist of
different cell types.
• Disconnect fully loaded or discharged rechargeable
batteries from the product.
• Do not charge/discharge rechargeable batteries di-
rectly in the model. First, remove rechargeable batte-
ries from the model.
• Place the charger/discharger and rechargeable bat-
tery on a non-flammable, heat-resistant surface (e.g.
stone tiles).
•
Maintain enough distance from flammable objects.
Allow enough space between the charger/discharger
and the rechargeable battery. Do not place the rechar-
geable battery on the charger/discharger.
• Ensure adequate ventilation because both the char-
ger/discharger and rechargeable batteries will become
hot during charging/discharging. Never cover the char-
ger/discharger and rechargeable batteries!
b) Additional safety instructions on LiPo/Li-ion/LiHv/LiFe rechargeable batteries
Special care must be taken when charging/discharging, operating and handling rechargeable LiPo/Li-Ion/LiHv/LiFe
batteries.
• The outer shell of LiPo rechargeable batteries nor-
mally consists only of a very thick film and is extremely
sensitive.
• Never destroy or damage the rechargeable battery, do
not drop it or puncture it with any objects. Protect the
rechargeable battery from mechanical stresses and do
not pull on its connection cables! This may cause a
fire or explosion!
• Charge LiPo rechargeable batteries with a charging
current of max. 1 C (unless otherwise stated by the
battery manufacturer!).
• Make sure that the rechargeable battery does not
overheat during use, charging, discharging, transport
and storage. Do not place the rechargeable battery
near heat sources (e.g. model control, motor) and pro-
tect it from direct sunlight. This may cause the battery
to overheat, which can cause a fire or explosion!
• The temperature of the rechargeable battery must
not 60 °C (also note all other manufacturer
information!).
• Stop using the rechargeable battery if it is damaged
(for example after a crash) or if its outer shell is bloa-
ted/swollen. Do not recharge it. This may cause a fire
or explosion!
• Use only a suitable charger/discharger to charge/di-
scharge lithium rechargeable batteries and observe
the correct charging method. Do not use conventional
chargers/dischargers for lithium rechargeable batte-
ries in order to avoid fire and explosion hazards!
• When charging lithium rechargeable batteries with
more than one cell, use a “balancer".
• The discharge current must not exceed the value prin-
ted on the rechargeable battery.
Technical Data
Observe the technical data in the enclosed product documents and the data in the detailed operating instructions.
Important Information
Charger/Discharger
This document applies to the following models:
Item no.
Model
Product Type
Item no.
Model
Product Type
1953674
FD 100
Discharger
1970433
T8
Charger
1953675
T6 Lite
Charger
1947638
D-2
Charger
1970434
T6
Charger
This product complies with the statutory national and European requirements. All company names and product na-
mes are trademarks of their respective owners. All rights reserved.
Detailed Operating Instructions
Download the detailed operating instructions via the link www.conrad.com/downloads or scan
the QR code shown here. Follow the instructions on the website.
Explanation of symbols
This symbol indicates specific risks associated with handling, operation or use.
Safety instructions
Read these instructions and the accompanying operating instructions carefully and pay
particular attention to the safety instructions. If you do not follow the safety instructions and
information on proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
a) General information
• Keep the product/accessories and packaging material
out of reach of children! They are not toys.
• For safety and approval purposes, you must not re-
build and/or modify this product.
• If you use the product for purposes other than those
described above, the product may be damaged. In
addition, improper use can result in short circuits, fires,
electric shocks or other hazards.
• Keep the documents that belong to the product in a
safe place and give them to any subsequent owners.
• To ensure safe operation, the user must follow the sa-
fety instructions and warning notices that are included
in the documents that belong to the product.
• If it is no longer possible to operate the product safely,
take it out of operation and protect it from any acciden-
tal use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambi-
ent conditions or
- has been subjected to any serious transport-related
stresses.
b) Facilities
• Always comply with the accident prevention regulati-
ons for electrical equipment when using the product in
commercial facilities.
• In schools, educational facilities and hobby or DIY
workshops, the product and accessories must be
operated under the supervision of qualified personnel.
c) Placement
• It is intended for indoor use only. Contact with mois-
ture, e.g. in bathrooms, must be avoided under all
circumstances.
• Place the product in a secure place so that it is absolu-
tely secure and cannot fall down.
• Do not place any vessels with liquids on the device.
• Never place the charger and the rechargeable battery
on a flammable surface (e.g. carpet). Always use a
suitable, non-flammable, heatproof surface.
d) Operation
• Never short circuit input and output ports!
• The product and connected rechargeable batteries
must not be operated unattended.
• Never touch the product with wet or moist hands du-
ring operation. There is danger of a life-threatening
electric shock
• Always keep rechargeable batteries far away from
flammable materials, both during and after charging/
discharging.
• Charge/Discharge and store rechargeable batteries in
a fireproof container.
• Never charge/discharge defective or damaged rechar-
geable batteries.
• Never charge/discharge rechargeable batteries con-
nected to an electrical circuit.
• Never connect the product to the rechargeable batte-
ry immediately after it has been brought from a cold
environment to a warm one. The condensation which
forms can damage the product. Allow the product to
reach ambient temperature disconnected from rechar-
geable batteries and power supply.
• Improper use (too high charging current or incorrect
polarity) can supercharge or damage the rechargeable
battery. In the worst case, the rechargeable battery
can explode and thereby cause serious damage.
• The product develops heat during operation. Do not
touch hot surfaces, in order to avoid burns.
•
Ensure that there is sufficient ventilation during ope
-
ration. Never cover the product and/or the connected
rechargeable battery.
• Allow enough space (at least 20 cm) between the
product, the rechargeable battery and other objects.
• Do not obstruct the ventilation of the product.
Never insert any objects in ventilation openings! Con-
tact with dangerous voltages and short-circuits with
serious consequences may occur.
Do not obstruct the cooling fan, if your product has
one.
• If the product is not to be used for a long period of time
(e.g. storage), disconnect any connected rechargeab-
le battery from the product and disconnect the product
from the power supply.
Additional safety instructions – Model D-2
a) Power supply
• Observe connection data in the operating instructions.
• The mains socket must be located near the product
and be easily accessible.
• Never unplug the mains plug by pulling on the cable.
Always use the grips on the plug.
• Unplug the mains plug from the mains socket if you do
not plan to use the appliance for an extended period
of time.
• For safety reasons, disconnect the mains plug from
the mains socket during thunderstorms.
• Make sure that the mains cable is not squeezed, bent,
damaged by sharp edges or subjected to mechanical
stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the
mains cable. Otherwise the mains cable may be da-
maged. Damaged mains cables can cause a fatal
electric shock.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in elec
-
tronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
*1947638_1953674_1953675_1970433_1970434_v1_0419_02_jh_ss_en
