Intended Use
The product is placed between the table surface and the notebook and is used to cool your note-
book with a built-in fan. Thanks to the soft padding on the underside, you can also set the product
on your lap to work with your notebook.
An extendable stand can be clipped into the underside to enable a comfortable working posi-
tion.
The stand can also be used separately, so that you can set up e.g. a small tablet computer or
a mobile telephone.
The power supply for the fan in the cooling pad occurs via USB. The USB cable required for this
purpose is located on the underside of the cooling pad and can be unfolded there in a recess.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Cooling Pad
• Two spacers (clipped into the underside of the cooling pad)
• Operating instructions
Safety Instructions
The warranty will be void in the event of damage caused by non-compliance
with these safety instructions. We do not assume any liability for any resulting
damage!
We shall not accept liability for damage to property or personal injury caused
by incorrect handling or non-compliance with the safety instructions. The
warranty will be void in such cases!
a)
General
• The unauthorised conversion and/or modi
fi
cation of the product is not permitted for
safety and approval reasons (CE).
• The product is not a toy; keep it out of the reach of children.
• Do not leave packaging material carelessly lying around, since it could become a
dangerous plaything for children.
• Handle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
• If you have any questions that are not answered in this manual, please contact our
technical service or another specialist.
b) Installation location
• Choose an appropriate location for the cooling pad. It has to be stable, level and
suf
fi
ciently large. The same is true if you use the extendible stand separately e.g.
for a tablet computer or a mobile phone.
• The product may not be subjected to any extreme temperatures, direct sunlight or
strong vibrations; it may not become damp or wet.
• Do not place the product on valuable surfaces without using suitable protection, as
this can cause scratches or pressure marks.
• When laying out the USB power cable, make sure that it is not damaged by sharp
edges.
c)
Operation
• Never push objects through the cooling pad’s protective guard; there is a serious
risk of injury. In addition, this will damage the cooling pad; loss of warranty/guaran-
tee!
• When the cooling pad is in use, lightweight objects or hair could be sucked into it.
Risk of injury.
• Never block the intake and exhaust openings, since this could lead to overheating.
Never fasten any decorative items or similar to the cooling pad.
• Operate the cooling pad only with a suitable power supply, e.g. through the USB
port of a notebook or through the USB port of a USB hub with its own power supply
• Never pour any liquids above or next to the product. There is a risk of
fi
re.
• Use the product only in a temperate climate, never in a tropical climate.
Getting Started and Operation
Power supply
The USB cable is found in a recess on the underside; unfold it. Connect the USB plug to a free
USB port of your notebook.
You can also use the USB port of a USB hub with its own power supply or a USB power socket
of a corresponding wall plug transformer or similar device that can deliver the required output
voltage (see chapter “Technical Data”).
Tilting the notebook forward
Two spacers are clipped into place on the underside; take them out. You will
fi
nd various slits
in the top of the cooling pad. Depending on the size of the notebook, you can place the spac-
ers appropriately before you set the notebook on them.
Air can also be supplied faster through the increased air space between cooling pad and
notebook underside, which improves the cooling. For this reason, you should always use the
spacers.
Placing on legs/lap
Thanks to the cushioned underside of the cooling pad, an optimal operation is ensured even
when no table is available. Because notebooks often become very hot underneath, protect your
skin against burns with the cooling pad.
During use, make sure that the notebook and the cooling pad stand safely and cannot fall
down.
Placing on a table
Unfold the two small stand feet on the underside and place the cooling pad on a stable, level,
suf
fi
ciently large surface. Place the notebook on the cooling pad; check whether the notebook
and the cooling pad stand securely and cannot tip over.
Using the stand for the cooling pad
Pull the stand out toward the front and then slide the stand from the correct side into the guide
rail on the back of the cooling pad (observe the arrow marking on the guide rail).
Unfold the two housing pieces of the stand from one another. Thanks to a locking
fl
ap inte-
grated in the interior, the two housing pieces can be locked with respect to one another.
O P E R A T I N G I N S T R U C T I O N S www.conrad.com
Notebook Cooling Pad Multifunction
Item no. 87 46 85
Version 04/13
