26
Press the “Mode” (B) button to confirm and set the hours. The hours blink.
7�
Press the “Start/Stop” (C) to increase or “Split/Reset” (D) to decrease�
8�
Press the “Mode” (B) button to confirm and set the minutes. The
9�
minutes blink�
Press the Start/Stop to increase or Split/Reset to decrease�
10�
Press the “Mode” (B) button to confirm and set the hour format.
11�
Press the Start/Stop or Split/Reset to change�
12�
Press the “Select” (A) button at any time to exit the setting
13�
procedure�
Pacer
6.8
Pacer setting can be done only if the stopwatch is not yet running in
pacer mode� The synchronization function with Chrono mode can only be
activated when the chronograph has been reset�
Pacer setting & display
6.8.1
Step length (in meter)
Beeper frequency (in bpm)
Total distance
Step counter
Press the “Select” (A) button and hold it for 2 seconds, the figures of
1�
the beeper frequency blink�
Press the “Start/Stop” (C) or “Split/Reset” (D) to set the beeper
2�
frequency in increments/decrements of 5 (range 30 - 240 bmp)�
Press the “Mode” (B) button to confirm and set the first digit of the
3�
step length�
Press the “Mode” (B) button to confirm and set the second digit of the
4�
step length�
Press the “Mode” (B) button to confirm and set the third digit of the step.
5�
Determine your step length precisely before� The maximum value to be
set for the step length is 9�99 meter�
Using the pacer
6.8.2
Pacer operation with chronograph
Press “Split/Reset” (D)� The
1�
-icon appears in the display� The pacer
function is now coupled to the chronograph� Whenever the chronograph
starts or stops the pacer does the same�
Summary of Contents for 860112
Page 59: ...59 ...
