www.conrad.com
O P E R A T I N G I N S T R U C T I O N S
Engine-Remote start button
Version 09/10
Item no. 85 73 15
Intended use
The product is used to start car engines. The provided start button begins the operation.
The product is intended for dry indoor use only.
All safety instructions and notes on operation in these operating instructions must be observed
at all times. These instructions not only protect the device but also and in particular your health.
Please read through the operating instructions carefully before using the product. Keep them in
a safe place for future reference.
Delivery scope
• Start switch
• Terminals with cables
Explanation of symbols, labels
This symbol with lightening is used when your health is at risk, e.g. through
an electric shock.
This symbol points out particular dangers associated with handling, function
or operation.
The product is exclusively intended for the operation and use in dry indoors,
it must not get damp or wet!
Observe their operating instructions!
Safety instructions
The guarantee/warranty will be void if damage occurs due to failing to com-
ply with the operating instructions! We accept no liability for damage as a
result!
Nor do we assume liability for property damage or physical injury caused
by improper use or failure to observe the safety instructions. In such cases
the warranty/guarantee is void.
• For safety reasons, any unauthorized conversion and/or modifi cations to the
product are not permitted.
• The product is not a toy and must be kept out of the reach of children! Particular
care must therefore be exercised if children are around.
• Do not leave any packaging material unattended. It may become a dangerous
toy for children.
• Keep the operating instructions safe for future reference.
• If you sell or pass on this product to a third party, always include these Direc-
tions for Use.
• Maintenance, adjustment and repair of the product may only be carried out by
an expert or a specialised repair shop.
• The product is approved for operation in dry, closed rooms only. It must not
become damp or wet as there is the risk of a deadly electric shock! Never touch
the product with wet hands.
• If it can be assumed that safe operation is no longer possible, the device must
be turned off and precautions are to be taken to ensure that it is not used
unintentionally.
• It can be assumed that safe operation is no longer possible if the product:
-
shows visible damage (e.g. broken housing).
-
was stored under unfavourable conditions.
-
no longer operates after transport.
• Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
• Please consult a specialist in case of doubts about correct operation or product
safety.
• If you have questions which remained unanswered in these operating instruc-
tions, please contact our technical advisory service
• Please follow the instructions and rules and regulations of respective vehicle
manufacturer when operating vehicle and vehicle engine (Service manual).
Always observe the applicable accident prevention regulations and safety pre-
cautions for operating vehicles and vehicle engines.
• The use of this product requires technical knowledge about the mode of opera-
tion and the superstructure of respective vehicle or vehicle engine. The product
is connected to particular points. These are in different places for each vehicle
and observe vehicle-specifi c rules while connecting.
• Before all activities, get information about the necessary rules and instructions
for the application of this product. Non-observance may result into both the
damage to vehicle and danger for persons.
• In case you do not have the necessary professional knowledge or not sure
about the activities and their results, leave this work to corresponding respon-
sible technician.
• Exhaust emissions and fuel vapours are hazardous to health! Do not start the
motor in enclosed spaces.
• Never leave vehicle unattended while using the product.
• All connection leads and lines must be installed at suffi cient distance from hot
surfaces (e.g. exhaust system) and moving elements (e.g. rotating fan wheel).
Check in particular any used connection and extension cable.
• When working on running vehicle engine, risk of being injured by hot, moving
or electrically charged parts exists. The fan wheel, V-Belts, exhaust manifold
and the parts of ignition system leading high voltage are particularly dangerous.
Electrical ventilators can start unexpectedly and quickly without pre-warning!
• Avoid the direct contact with live components.
• Ensure that the ignition of your vehicle is switched off before connecting the
product.
Connect product
1. Connect a connection
terminal (1) with the plus
pole of the vehicle battery
according to the instructions
provided by automobile
manufacturer.
2. Connect the other connec-
tion terminal (2) with the cor-
responding contact on the
starter (engagement relay)
or starter relay according to
the instructions provided by
automobile manufacturer.
The Engine-Remote start button must not be used for by-passing the power
supply of starter (strong current). It must be used only for the control current
to activate the engagement relay.
You may start the engine using the start button after connecting the product by a professional
personnel.
☞
Also observe the applicable instructions given in operating instructions of the respec-
tive vehicle while starting the engine.
If the engine is running, do not reactivate the start button. The reactivation may result
in damage to starter.
Care and maintenance
• Clean the product with a soft, clean and dry cloth. Do not use aggressive detergents or chemi-
cals as these can damage the housing and contacts.
Disposal
Never dispose of products and devices labelled with the following symbol in the
household waste. You are obliged to dispose of these separately. Ask your local
authority about the facilities for controlled disposal.
Technical Data
Dimensions .......................................................... 112 x 31 x 31 mm
Weight ................................................................. approx. 0.24 kg
1
2
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
©
Copyright 2010 by Conrad Electronic SE.
