• Select the required focal width by carefully turning the front part of the objective
to the right or left.
• Fix the required position by re-tightening the “Focal width adjustment fixating
screw” (7).
• Loosen the “Sharpness adjustment fixating screw” (8).
• Select the required sharpness by carefully turning the “Sharpness adjustment fix-
ating screw” (8) to the right or left.
• Fix the required position by re-tightening the “Sharpness adjustment fixating
screw” (8).
9. Adjust Function Selection Switch
All selection switches for the function selection switch are ide-
ally pre-adjusted by default and are thus aligned with using the
included objective.
Where it is not required, do not change the adjustment switch
for the “function selection switch” (9).
The function selection switch (3) has four separate adjustment switches. These are
the functions for these adjustment switches:
AWB ON/OFF
Activates (=ON) or deactivates (=OFF) the auto white balance.
AGC ON/OFF
AGC = Auto Gain Control. Slider position ON = low image signal increase (default
setting), slider position OFF = strong image signal increase (for low ambient bright-
ness).
EE/AI
EE Position = electronic illumination control (default)
AI Position
= objective illumination
27