Operation
Important:
Before starting to operate, please read carefully the section re-
lating to regulation use of the device, and also the Notes on
Safety and technical data.
Fitting / replacing the battery:
After some time, the acoustic signal becomes weaker or the time
display is difficult to read: time to replace the battery.
This is what you do:
Using a suitable cross-head screwdriver, loosen the three screws
of the housing (7) and carefully remove the housing cover. Replace
the used microcell with a new one of the same type.
When fitting the battery, make sure it is the right way round
(polarity). See figure showing components!
Important:
If after fitting the battery, a continuous beep is audible, and all
display elements light, you need to remove the battery, refitting
it after a waiting period of approx. 10 seconds. Replacing the
battery deletes all settings. In this way, you are able to comple-
te a RESET!
Replace the cover of the housing and re-attach the cover using the
three housing screws (7).
Make sure not to tighten the screws too much (you should feel
when the screws are tight enough).
7
Description of components
1.
Start/Stop button
7.
Housing screw
2.
Round adjustment knob
8.
Battery compartment
3.
Time display
9.
Attachment magnet
4.
Clock button
10. Acoustic signal opening
5.
Timer button
11. Attachment clip
6. AM-PM display
12. Stand
12
+
_
7
8
9
1
11
:
PM
TIMER
CLOCK
START
STOP
1
2
3
4
5
6
6
