![background image](http://html1.mh-extra.com/html/conrad/61-17-61/61-17-61_operating-instructions-manual_2654014034.webp)
34
9. Connection
• The terminal strips on the indoor unit (8) and outdoor unit (22) are numbered. Observe the
respective markings in the case.
• Connect the terminal strips 1 – 5 of the indoor unit (8) to those of the outdoor unit (22).
Indoor unit terminal-#
x
Outdoor unit terminal #
1
x
1
2
x
2
3
x
3
4
x
4
5
x
5
• Connect the two open cable ends of the mains adapter to the outdoor unit terminals “G” and
“H”. Here, the polarity is irrelevant.
• The two terminals “E” and “F” are connected to the relay inside the outdoor unit. The relay
triggers when a registered access card is held to the sensor area (13) or if you press the
button “B” (7) on the indoor unit.
The terminals are potential-free, the max. switching voltage is 30V, the
switching current max. 1A.